Polar Recovery Mini Ice Bath Chiller

The water chiller is very quiet, see the readings below.

Our Mini Chiller measures ∼44db noise level (comparable to a fridge)

Yes, Our chiller is built to withstand all the elements, your water stays clean and cold, even in the hottest climates.

Do be cautious in freezing conditions, and follow the recommendations in the manual that comes with your chiller.

It is essential that your chiller is running 24/7 should the outside temperature drop below freezing, otherwise the chillers pipes and internal tank can get damaged. With consistent water flow this does not happen.

We always recommend emptying the chiller from water by disconnecting the hoses and tipping it, to let water drain out, and thereafter storing it inside in non-freezing conditions until needed again. The purpose of the chiller is to operate in warmer temperatures, to keep your water cold, and there's no need to have your chiller connected to the PrimalPod, when it's freezing outside, as your water will maintain the cold temperatures needed naturally

No! The Power usage is only 280 watt, which is comparable to the freezer in your home.

Example of power usage: at 25°C room temperature, and chiller temperature set at 8°C will consume around 1.4-1.8 kWh per day (every 24 hours). On Average this is around £0.15p at per day in electricity cost to run The PrimalChiller 24/7. (These are estimates and can vary depending on the climate and temperatures where you live)..

We recommend cleaning the water filter attached to the chiller every 1 - 2 weeks. Simply take it out and rinse it with a brush and tap water.

It is important to replace the filter once every 90 days to not damage the chiller due to restricted water flow.

Yes. The chiller can easily be used with your current Polar Recovery Tub or even any form of other ice bath.

Connect to your existing Recovery tub:

you simply connect the hose entering the water filter side of the chiller to the drain valve on your PrimalPod. And the second hose coming from the chiller pump goes into the Recovery Tub over the top ring (see picture illustration in the product gallery).

Connect to any other Ice Bath:

You can also connect the chiller to any ice bath, bathtub, bucket - you name it. The chiller comes with pump and filter, so you simply put both hoses from the chiller into any body of water to start cooling it.

If you have any questions or need help, please email support@polar-recovery.com

All orders are shipped from our warehouse's in the UK and USA!

We recommend starting out at around 15°C if it's your first time, and then slowly lowering the temperature and duration for each session. That way your body will get acclimated to the cold.